Measuring the success of the federal government's Brownfields Program

In 1995, the U.S. Environmental Protection Agency (US EPA) initiated the Brownfields Program to help local governments clean up and reuse hundreds of thousands of contaminated former factories and transportation and other commercial sites in cities and industrialized suburbs. By the end of 2002, the Brownfields Program had distributed grants of about $200,000 each to 436 local governments. Program grants have diffused through federal, state, regional, and local levels of government and private and not‐for profit organizations, and have reached into economically distressed neighborhoods. As expected, grant recipients disproportionately had a legacy of contaminated industrial sites and relatively large African American and/or Latino populations. But abandoned factories and environmental justice concerns do not completely explain the geographical distribution of recipients. Award winners tended to be larger cities with more capacity to compete for grants and were likely to be connected to sources of information about the grant opportunity and to decision makers. With a few exceptions, recipients consider the program to be highly successful at stimulating entrepreneurs to remediate and redevelop sites and, sometimes, surrounding neighborhoods. © 2005 Wiley Periodicals, Inc.     

Iron and aluminium based adsorption strategies for removing arsenic from water

Arsenic is a commonly occurring toxic metal in natural systems and is the root cause of many diseases and disorders. Occurrence of arsenic contaminated water is reported from several countries all over the world. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of arsenic in drinking water and the need to develop low cost techniques which can be widely applied for arsenic removal from contaminated water. This review briefly presents iron and aluminium based adsorbents for arsenic removal. Studies carried out on oxidation of arsenic(III) to arsenic(V) employing various oxidising agents to facilitate arsenic removal are briefly mentioned. Effects of competing ions, As:Fe ratios, arsenic(V) vs. arsenic(III) removal using ferrihydrite as the adsorbent have been discussed. Recent efforts made for investigating arsenic adsorption on iron hydroxides/oxyhydroxides/oxides such as granular ferric hydroxide, goethite, akaganeite, magnetite and haematite have been reviewed. The adsorption behaviours of activated alumina, gibbsite, bauxite, activated bauxite, layered double hydroxides are discussed. Point-of-use adsorptive remediation methods indicate that Sono Arsenic filter and Kanchan™ Arsenic filter are in operation at various locations of Bangladesh and Nepal. The relative merits and demerits of such filters have been discussed. Evaluation of kits used for at-site arsenic estimation by various researchers also forms a part of this review.     

Extraction of Co,Ni, Cu,Zn and Cd ions using 2-aminophenylaminopropylpolysiloxane

Insoluble porous solid functionalized ligand system bearing 2-aminophenylaminopropyl chelating ligand of the general formula P–(CH₂)₃NH–(C₆H₄)–NH₂ was prepared via the sol–gel process, where P represents [Si–O] _n polysiloxane network. First, the 2-aminophenylaminopropylsilane agent was prepared by substitution reaction between 3-chloropropyltrimethoxysilane and 1,2-phenylenediamine, followed by hydrolytic polycondensation between 2-aminophenylaminopropylsilane agent and tetraethylorthosilicate(TEOS). The immobilized 2-aminophenylaminopropylpolysiloxane P–(CH₂)₃NH–(C₆H₄)–NH₂(P–AphA) was characterized by ¹³C NMR, XPS, and FTIR. The results showed that 1,2-phenylenediamine groups were introduced onto polysiloxane network. The functionalized ligand system exhibits 90–100% metal uptake capacity for all metal ions except Cd²⁺. The elemental analysis data and the metal uptake capacities of the immobilized ligand system suggest that over than 90% ligand sites were involved in coordination with metal ions except that of cadmium forming 1:1 metal to ligand ratio complexes.     

WEPP and ANN models for simulating soil loss and runoff in a semi-arid Mediterranean region

This paper presents the use of both the Water Erosion Prediction Project (WEPP) and the artificial neural network (ANN) for the prediction of runoff and soil loss in the central highland mountainous of the Palestinian territories. Analyses show that the soil erosion is highly dependent on both the rainfall depth and the rainfall event duration rather than on the rainfall intensity as mostly mentioned in the literature. The results obtained from the WEPP model for the soil loss and runoff disagree with the field data. The WEPP underestimates both the runoff and soil loss. Analyses conducted with the ANN agree well with the observation. In addition, the global network models developed using the data of all the land use type show a relatively unbiased estimation for both runoff and soil loss. The study showed that the ANN model could be used as a management tool for predicting runoff and soil loss.     

Energy production and sustainability: A study of Belo Monte hydroelectric power plant

The increase in energy demand due to economic and population growth necessitates the expansion of the Brazilian energy supply. Hydropower energy, a renewable energy source, arguably clean, presents an energy solution for many countries such as Brazil, with large hydric reservoirs, which help them reduce energy dependence on fossil and imported fuel sources. However, it must be emphasized that without careful planning, the creation of hydropower plants will cause severe social and environmental damage due to the large areas that need to be flooded for the implementation of these plants. The installation of hydropower plants floods vast forest areas, causing loss of biodiversity, displacement of native Brazilian people and riverside populations, and changes to the water acid levels and the natural course of rivers. To mitigate these effects, authorities must first conduct a study on installation possibilities and potential socio‐environmental consequences, to be interpreted and used by the agents involved. Aiming to analyze the social‐environmental impacts of the hydropower plants, this research seeks to investigate the capacity of mitigation of the negative effects of the implementation of the hydropower plants, specifically with regard to the Belo Monte plant, Brazil.     

Carbon paste electrode modified with chromium thiopental for the potentiometric flow injection analysis of chromium (III)

A chemically modified carbon paste electrode for chromium (III) based on the formation of ion-association complex of chromium with 5-ethyl-6-oxo-5-pentan-2-yl-sulfanyl-pyrimidin-4-olate (thiopental, THP) as electroactive ion-exchanger (Cr-THP) was prepared and investigated. The electrode has a linear dynamic range of 1.7?×?10^?6–1.3?×?10^?2?mol?L^?1, with a Nernstian slope of 19.6?±?0.5?mV per decade and a detection limit of 9.0?×?10^?7?mol?L^?1. It has a fast response time of <15?s and can be used for at least 7 weeks without any considerable divergence in potential. The proposed sensor revealed good selectivity for Cr(III) over a wide variety of mono-, di-, and trivalent cations and could be used in the pH range of 2.3–6.5. The proposed electrode was used in batch measurements and in flow injection analysis. The Cr-CMCPE was successfully applied for the determination of Cr(III) in real samples (wastewater of hot dip galvanizing unit and alloys). The present electrode was also used as an indicator electrode in potentiometric titration of Cr(III). The results were highly satisfactory.     

Performance study on evacuated tubular collector coupled solar still in West Texas climate

Experimental study was performed on a single basin active solar distillation system augmented with a solar collector using evacuated solar tubes. Field tests were conducted over several days under the climatic conditions of West Texas to evaluate the effect evacuated solar tubes have on the daily distillate yield rate. To investigate the feasibility of the solar tubes, active and passive solar stills with and without exterior insulation were examined. The maximum daily production rate for the active distillation system using evacuated solar tubes and the passive distillation system was 3.6 and 1.4 kg/m²day, respectively. The results showed the augmentation of the still with evacuated solar tubes increased its production capacity by a factor of 2.63. It also increased the maximum temperature of the water in the still basin by at least 20 °C. Economic analysis shows that it is feasible to use evacuated tubular collector coupled solar still as an alternative means for reclaiming water in farmlands with a payback period of approximately 6 years.     

A Novel Aloe Vera-Loaded Ethylcellulose/Hydroxypropyl Methylcellulose Nanofibrous Mat Designed for Wound Healing Application

Journal of Polymers and the Environment - Newly, the usage of nanofibers (NFs) as wound dressings with the aim of their rapid healing and prevention of bacterial infection has been considered by...